- Shop All
- Accessories
- Meters and Sensors
- Temperature Sensors
- Ruuvitag Pro 2 In 1 Bluetooth Sensor
Ruuvitag Pro 2 In 1 Bluetooth Sensor
Ruuvitag Pro 2 In 1 Bluetooth Sensor
SKU:ART-RUUVSENS1-RUU
Industrial Wireless Temperature and Humidity Sensor
Share
Collapsible content
Description
Accurate and Durable Sensor for Versatile Conditions
RuuviTag Pro is a rugged IP certified environmental sensor for temperature, air humidity, air pressure and acceleration monitoring.
The Pro is based on RuuviTag’s successful concept and additionally brings several new outstanding features to the table. RuuviTag Pro is the toughest open source sensor on the market.
Wet-Certified
RuuviTag Pro tolerates wet and rough conditions.
The IP67 certified RuuviTag Pro (4in1 and 3in1) comes with a breathable membrane that enables air humidity and air pressure monitoring. It tolerates temporary wet conditions and it’s a good choice to outdoor use. The 4in1 and 3in1 models are for non-condensing uses only.
The IP68 and IP69K certified RuuviTag Pro (2in1) offers a full protection against water with its fully sealed enclosure. It has been laboratory tested to work in water depth of up to 50 meters for 24 hours and to tolerate high pressurised spraying with 80 °C water.
Note! Please keep in mind that Bluetooth signals are strongly attenuated in the water and range will be significantly reduced. Ruuvi sensors can then be used in shallow water if you want to maintain connection (for example pool or jacuzzi). If you want to measure deeper, you can attach the RuuviTag Pro to a string and take it back to the surface when you want to download the data history.
Medical Grade Temperature Accuracy
RuuviTag Pro has an extremely accurate temperature sensor on board. The sensor is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers.
Measurement resolution is 0,01 °C, while absolute accuracy is astounding at ±0,1 °C across the temperature range of –20 to +50 °C, with no calibration.
The sensor units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.
Professional Mounting
RuuviTag Pro has two strong mounting ears that allow reliable installation methods to be used. Wooden ceilings, gyproc walls, concrete foundations, you name it. Attach and measure professionally wherever you need to.
From -40 to +85 °C
RuuviTag Pro’s casing and electronics are designed to operate without interruption in a wide range of temperatures. Maintenance is minimal because the included Ruuvi CR2477T wide temperature battery lasts in normal use 1-2 years.
Technical Specifications
Operating temperature: -40 ºC to +85 ºC
Battery: 1000 mAh CR2477T battery (included)
Radio protocols: Bluetooth (default), Wirepas mesh, Lumenradio mesh, Bluerange mesh, Other 2,4 GHz proprietary protocols
Temperature sensor accuracy: Absolute accuracy ±0,1 °C, output resolution 0,01 °C
Humidity sensor accuracy: Typical absolute accuracy ±2 %, 20...80 %, 25 °C (only 3in1)
Pressure sensor accuracy: Typical absolute accuracy ±1 hPa
Main chip: Nordic Semiconductor nRF52832
Temperature sensor: Texas Instruments TMP117AIDRVR
Humidity sensor: Sensirion SHTC3 (4in1 and 3in1 only)
Pressure sensor: Infineon DPS310 (4in1 only)
Accelerometer: STMicroelectronics LIS2DH12
NFC: Embedded NFC™-A tag antenna
Enclosure material: Rugged polycarbonate
Waterproofing: IP67 (4in1 and 3in1), IP68 & IP69K (2in1)
Certifications: CE, FCC, ISED, TELEC, IFETEL, NOM, RTCA DO-160, RoHS, IP67, IP68, IP69K